The high-temperature filter is usually used for air purification in the warm-air type high-temperature grill box and spray factory high-temperature grill box air purification. High-temperature filter characteristics: large exhaust air volume, low friction resistance, non-combustibility, good acid resistance, low water absorption, and low heat resistance, and can be used for long-term applications in natural environments at 400°C.
I think there are many elements that endanger the high efficiency of high-temperature filters. In the whole process of all normal applications, if you are not concerned about this element, it will cause a certain reduction in the high efficiency of the filtration of machinery and equipment. As far as users are concerned, they are all very badly affected. It is suggested that everyone should be concerned about the following factors at multiple levels when applying high-temperature filters to ensure high filtration efficiency and actual filtration effects.
Condition of filter material or dust bag
Everyone needs to understand the condition of the filter material or the dust bag, and immediately determine the high efficiency of the high-temperature filter. Normally, if the filter material or the dust bag has already come close to the time to be replaced, then The frictional resistance in the filtration work slowly increases, which will cause the high filtration efficiency of the high-temperature filter to slowly decrease. At this time, if you are willing to maintain the high filtration efficiency of the high-temperature filter, you must immediately clean up the dust bag or filter material. After cleaning, there is no excessive residue in the dust bag or filter material, and the filter friction resistance is reduced. , Filter, and repair with high efficiency.
Airtightness and quality of machinery and equipment
The airtightness and quality of purification equipment also endanger the high filtration efficiency of machinery and equipment at the required level. If the airtightness of the high-temperature filter is weak and there is a ventilating situation, the high-temperature filter is very prone to short-circuit failures in the small control loop and insufficient mud production, which will endanger the high efficiency of filtration. Maybe the tightness is weak and it is very easy to reduce the temperature of the high-temperature filter system software, and it is easy to form a damp bag. At this time, the filter friction resistance of the high-temperature filter expands, which harms the high efficiency of the filtration of machinery and equipment.
Filter the hazards of the office environment
The natural environment in the filtration work also immediately endangers the high filtration efficiency of the high-temperature filter at the required level. Normally, the filtering wind immediately harms the high efficiency of the high-temperature filter, and there are many factors that endanger the filtering wind, such as the viscosity, temperature, and dampness level in the natural environment. If all these factors are combined, it will be On the level, it is harmful to the high filtration efficiency of the high-temperature filter.
I think there are many elements that harm high-temperature filters. In the whole process of work, I am willing to maintain high-efficiency high-temperature filters. I must also pay attention to the many aspects of the left and right, and control all areas. It can continuously improve the filtration efficiency of machinery and equipment.